REPAIRING YOUR AIRBAG | DD AIRBAGS
Our airbags are built tough and designed to handle years of riding, so repairs are rarely needed. But on the off chance you do find yourself needing to make a small repair, fixing it is quick and easy.Â
Below, we’ve outlined 5 simple steps that will have your airbag landing patched up and repaired in less than 5 minutes.
Step 1: Deflate and Clean
Start by fully deflating the airbag. Wipe down the damaged area with a clean cloth to remove any dirt, dust, or debris. A clean surface ensures the patch sticks properly.
Step 2: Cut Your Patch
Measure and cut a patch that’s large enough to cover the damaged area with a good margin around the edges.Â
Step 3: Apply Glue and Place Patch
Apply a generous amount of glue to the back of the patch and around the section of the airbag needing to be repaired. Carefully position the patch over the area and press down firmly, making sure there are no loose edges.
Step 4: Speed Up the Drying Process (optional)
Use a heat gun (or a hair dryer if you don’t have one). Hold it about 2 ft away from the patched area and move it in a circular motion for 1–2 minutes. This helps the glue bond faster and more securely.
Step 5: Let It Set
Allow the repair to set for at least 4 hours before re-inflating the airbag. If the weather is cold or damp, it’s best to leave it overnight before use.
At DD Airbags, our mission is to keep riders safe and progressing. Whether you need airbag repair tips, setup advice, or help choosing the right BMX, MTB, FMX or SNOW airbag, we’ve got you covered.
All airbag repair instructions outlined above apply to every DD Airbag model.
Airbag Repair FAQ
Q: Can I repair my DD Airbag myself?
Yes. All DD Airbags come with a repair kit, and small punctures or cuts can be fixed at home in just a few minutes by following the step-by-step instructions above.
Q: How long does an airbag patch last?
When applied correctly, a patch is permanent. The repair will hold up just as strong as the original material. After the repair is complete, the patch will hold strong so you’ll never have to worry about this area again.
Q: Do these repair steps apply to all airbags?
Yes. The repair process outlined here works for all DD Airbag models, including BMX, MTB, FMX and SNOW airbags.
Q: How long should I wait before reinflating the airbag?
Allow at least 4 hours for the patch to fully bond. In colder or damp weather, it’s best to leave it overnight before inflating.